Particularly good aging resistance, high tear resistance, additional ripstop threads, and enormous stiffness at only 33g / m² make the TX-Light fabric perfect for the upper and lower sails of our foil kites. Inside, the TX-Light Hardfinish fabric enables increased use of cross ports. The leading edge consists of 44g / m² DLX + fabric which better protects against abrasion and sharp-edged objects. Every fabric is optimized for its use, from UV-resistant surfaces and air-impermeable coatings to absorbent properties to improve airflow when wet.

The 4-Level Ram Air Technology (A, B, C, Z) distributes the forces over the entire profile depth of the foil kite and perfectly meets the requirements of a freeride product. Controlling the 4 levels via the mixer improves turning and supports relaunching. The foil kite changes its angle of attack as well as the profile camber without any loss of stability.

The reflex profile keeps the foil kite stable at a low angle of attack and at full acceleration. The counter-arching pushes the trailing edge down and prevents a front stall. The reflex profile is essential for controlling and depowering a foil kite.

The bridle check tool makes it easier to compare the bridle line lengths. At each level (A, B, C, Z), on each wing side of the foil kite, black markings make comparing front and back main line lengths easy (see line plan). To restore the flight characteristics, length differences between B and C levels relative to A level must be annulled by moving the rings on the mixer. To maintain performance and stability, we recommend regularly checking using the bridle check tool, if the product is used intensively.